Laptop batteries last longer and work better than models a few years ago, but they are still not safe from wear and tear and eventually lose some of their full capacity. Calibrate the portable laptop battery.
If you want to know how to calibrate the laptop battery to optimize its duration, you can easily do these tips.
Remember when you released your new laptop, and the battery lasted for hours and hours? With use and with each charge and discharge cycle, the batteries’ capacity remains far from 100%, although the operating system indicates otherwise.
All this is due to the composition of the batteries, in which there are chemical elements that, by their very nature, deteriorate over time.
However, we should not resign ourselves to losing a few valuable minutes of autonomy in our laptops. The most effective way to keep the battery in good condition is to calibrate it from time to time.
For example, most manufacturers recommend calibrating the battery approximately every two months to charge to its maximum theoretical capacity.
The process consists of 100% charging the computer’s battery, allowing it to fully discharge, holding it for a few hours without turning on the laptop, and then reconnecting it to the light.
Step 1: Charge your battery and keep the laptop connected for another two hours.
All you have to connect your laptop to electrical power and make sure the battery is fully charged.
Leave it a couple of hours more connected after reaching 100% and then disconnect it, so that the battery begins to drain.
During that time, you can use your laptop without problems (in fact, it is recommended, so that the battery is discharged with regular use).
Step 2: Let the battery drain and keep it without recharging overnight.
As soon as the laptop runs out of power, you will have to keep it for at least five hours without any charge.
If you can wait a little longer, better than better, so we recommend that you do it at night before going to bed and so the next day everything will be ready, without wasting your time.
Step 3: Recharge the laptop until it reaches 100%
Finally, you have to plug the laptop back into the light for the recharging process to start. Upon reaching 100%, you have already completed the battery charging process. That easy!